Kupids love bug

This Tutorial was written by me, Angel Flower, from my own ideas. Any similarities to others is coincedence. All my tutorials are registered with TWI.

For this tutorial you will need
A tube of choice.I am using the work of Jennifer Janesko. In order to use the image in this tutorial you MUST purchase it from CDO.

Scrap kit- I am using an awesome kit called Kupid Kitty by Wench Designs, you must purchase this kit from The Creativity Box.

Filters-eyecandy 4000-this is optional


New Image-600x600-transparent.

Open one of the ruffles, I used ruffle3. Paste as a new layer and resize it if needed. Anytime you need to resize, you can go image-resize-choose percent instead of pixels, make sure all layers is unchecked, and start with 80. If it is too big you can resize again, if its too small, simply go edit, undo, and then do the resize again with a smaller percent. You can also resize by grabbing the pick tool, the little arrow, and grabbing one of the corners of the box and dragging it to the size you want. Once you have resized your ruffle, postion near the top of your tag. Duplicate it by going image-duplicate.
Now go image flip, and then image mirror. Leave it where it is for now. Duplicate it again, and this time go image-free rotate-all layers unchecked, rotate single layer around center checked, 90 degrees left.
Postion this to the left of your tag. Now duplicate this one and go image mirror, and then image flip. Now that we have four pieces postion them to form kind of a rectangle as I have mine. This will be our frame. Once all positioned, go to layers-merge visible.

Now if you wish to resize the frame we made, do that now to how you want it.

Copy and paste flower6,or a flower of choice, as a new layer. Resize it and postion at the bottom left corner of the frame. Duplicate it and go image mirror. If needed move into position on on the opposite corner of the frame.

Paste flower vine1 as a new layer and move this layer below the two flower layers we just pasted. Resize the flower vine and position it on the bottom part of the frame in between the two flowers on the corners. See my tag for placement.

Copy and paste a paper of choice as a new layer. Move this below your frame layer. I chose to resize mine by about 64 percent using the image resize
method, then I used the pick tool and adjusted the size by dragging a corner of the box so that it fit in the frame. You can do as I did or you can grab
the magic wand, click in the center of the frame, go selections modify-expand by about 3, then invert and on your paper layer hit delete.

Paste lollipop1 as a new layer. Resize it and position on the left side of the frame. Move this layer under the flower layers. I also rotated mine
slightly using the pick tool.

Open the lovebug2 and paste as a new layer on your tag. Resize to your liking and position on the right side of your frame. See my tag for reference how this
should all be looking. Duplicate the bug and resize the duplicate and place over your lollipop stick. Again see my tag for how it should look.

Give the two bugs a drop shadow. Effects,3d effects, drop shadow, on the litte one I used 0,1,70,5,black, and on the bigger one I used 0,-1,70,5,black.

Paste the rose vine3 as a new layer. Resize and position on the right side of the frame. Move this layer to just above the frame layer. I went to effects-edge effects-
enhance. Duplicate this layer and go image mirror. Place into position if necessary. See my tag if needed for how this should look.

I then chose to place a butterfly on the left side of my frame toward the top.

Paste your tube and resize as needed. If any part sticks out of the frame, use the magic wand and click in the center of the frame, then go selections invert, and on the tube layer hit delete.

I chose to use the filters xero porcelain and radiance on mine. This is optional. For the xero-porcelain effect I used 50,128,128,0,0,0. Then I applied xero radiance using 128,128,128,88.

Give your tube a shadow of choice, I used 0,0,50,7.

Paste wings1 as a new layer and move this to the very bottom of your layers. Move it to the left and toward the top of the frame so it sticks out from the side and just above the top. Resize slightly if needed. See my tag for rerference. Grab your eraser tool and erase the little part that sticks out further toward the middle top of the frame. Now duplicate this layer and go image mirror.
If needed slightyly reposition. On both wing layers I used the edge effects enhance.

Now is the time if you wish to resize your entire tag to do so by going image resize, choose pixels instead of percent, make sure all layers is checked and choose the size you want.

Add your copyright so it is clearly visible. Add your name. I added a gradient glow to mine using eye candy 4000 but this is optional. I used a glow width of 3 with two colors. I then added a drop shadow to it.

SAVE AND YOU ARE DONE!
©ANGEL FLOWER JANUARY 2011

KITTY PLAYTIME

This Tutorial was written by me, Angel Flower, from my own
ideas. Any similarities to others is coincedence. All my tutorials
are registered with TWI.

For this tutorial you will need
A tube of choice.I am using the work of Keith Garvey. In order to use the image in this tutorial you MUST purchase it from MPT.

Scrap kit- I am using an awesome kit called Kupid Kitty by Wench Designs, you must purchase this kit from The Creativity Box here.

Filters-eyecandy 4000-this is optional


New Image-600x600-transparent.

Choose a frame, I used Frame7, copy and paste as a new layer. Resize by going image-resize-choose percent instead of pixels and change the number to 80. If this is still too big for you, you can resize again or you can click the pick tool in your psp, usually the little arrow, and drag the box you see by the corner to the
size you want.

Grab your magic wand tool, mode is add, match mode is RGB, tolerance 20, anti alias checked. Click inside the empty space/spaces of your frame. Go to selections, modify, expand by 2. Paste a paper of choice as a new layer, I used paper 21. Keep selected and go selections invert, then hit delete on your keyboard. This should remove any paper outside of the frame. Selections, select none.
Move your paper layer below your frame layer.

Click your frame layer to make it active. Effects, 3d effects, drop shadow. Use one of your choosing or I used 0,0,100,5 and black for color.

Paste a rose, I used rose 8, as a new layer. Resize it either by the image resize method or by using the pick tool and dragging the box to about the size of mine, or how u like it. Once you have it sized, grab your pick tool. Rotate the rose, you can do this with the pick tool by hovering over the small little rectangle that comes out of the center of the box, you will see two arrows if you hover over it. Click and hold it and move your mouse either up or down depending on which way you want it to go. Rotate it about like mine, or how you like, and then move it over to
the frame as I have mine.

Once you have it positioned, duplicate it and move the duplicate under your frame and paper layers. Go back to the top copy of the rose and grab your eraser tool. I used round shape with a size of 55, hardness 100, step 1, density 100, thickness 100, rotation 0, opacity 100. Erase the parts of the rose stem that are on top of the frame. I left mine so it looks as though its popping out from the side. You want to make it look like it is come out from under some part of the frame. Once you are happy with that, repeat the process but on the opposite side of the frame as i did mine.

Open one of the cats, I used cat10, and paste it as a new layer. Resize to your liking and position to the to the right side of the frame. See my tag for placement.

I then pasted one of the mice, mouse 6, as a new layer. Resize and Position this to the left and kind toward the top of the frame. Again see my tag for placement.

Paste your tube as a new layer. If needed resize it, move it below the frame but above the paper. Grab your magic wand, same settings as before, click on your frame layer and click inside the frame as before,selections, modify, expand by about 5, go back to your tube layer and go selections invert, hit delete. This should get rid of any part of the tube that was sticking out of the frame.
select none.

If you have another frame like I do, repeat the above steps for pasting the tube, the only two things I did differently was I went image, mirror, so the tube was facing the opposite way, then after it was all postioned and such, I changed the blend by double clicking it in the layer palette and changing the blend to hard light.

If you chose a double frame like I did, Choose another flower and paste it as a new layer above your frame layer. Resize and postion toward the top of the smaller of the two frames to the left side. If needed, rotate it some to make it fit how you want. I placed these all around my frame by pasting and resizing and rotating to make them look nice.

For finishing touches, I gave the cat a drop shadow of -1,0,75,black. I gave the mouse a drop shadow of 1,0,75,black. I pasted a bow on the top right side of my bigger frame. I gave that a
drop shadow of 0,0,75,black.

Now, if you are happy with your tag and the sizing of it, add your copyright so it is clearly legible. If you wish to resize your entire tag, do so before adding the copright. Go to image, resize, this time choose pixels and put the size you wish, make sure all layers is checked, and hit ok. Now add the copyright. Add your name in a font and colors of choice.Position how you like. I used eyecandy 4000 and added a gradient glow to mine but this is up to you. Give it a drop shadow of choice, I used 0,1,70,5,black.

Save your tag and you are done!

©angel flower January 2011

MYKA BLOOMS

CLICK THE TAG TO SEE IT FULL SIZE

This Tutorial was written by me, Angel Flower, from my own ideas. Any similarities to others is coincedence. All my tutorialsare registered with TWI.

For this tutorial you will need A tube of choice. I have used the work of Myka Jelina. In order to use the image in this tutorial you MUST purchase it from CILM.

Filters-Xenofex 2 rip open,

Animation shop

You will also need to download my flower here or use one of your own.

New image- 600x600

Paste my flower as a new layer

Resize it by going to image-resize, resize by 110 percent.

Paste your tube as a new layer an position how you like.

Right click on the tube layer and go to layers-merge visible.

Go to effects-distortion effects-twirl at -720.

Again, paste the flower and resize as we did above. Paste your tube again as a new layer.

Give your tube a drop shadow by going to effects-3d effects-drop shadow, 1,-2, 100, 5, and black.

I did not resize my tag but if you want yours smaller resize it now by going to image resize and make sure all layers arechecked and lock aspect ratio is checked, chosse pixels and put the size you want.

Now add your name in a font of choice. I used JOKERMAN font. Go to effects, edge effects, enhance, and just say ok when it says it needs to convert to raster. Now to turn your name you can do one of two things. The easiest way is to use the pick tool(the lil arrow tool), and when you see the box around the name you also see a line with a little tiny box in the center. Hover the mouse over the little tiny box and it will turn to arrows. When you see the arrows click and hold down the left mouse button and turn it in the direction you want it. Once happy with it, move it into postion.

The way I did mine was to first click the pick tool, hover the mouse over the tiny square on the left side of the name.You will see it turns to a straight arrow going side to side. Hold down the shift key and the arrows point up and down.While holding the shift key down, click and hold the left mouse button at the same time and slide the box up to where you want it. Once happy with it, move into position.

Give your name a drop shadow same as above only changing the -2 to a -3.

Add your copyright so it is clearly visible.

Duplicate your flower layer and move it to the top.

Duplicate this one until you have a total of seven. Hide all of these flower layers. Starting with the layer on top, leave thisone as it is and keep it closed. Unhide the next flower layer and on this layer go to effects, plugins, xenofex 2, rip open- curl size 10, curl amount 1, curl variation 80, roughness 5, shadow width 2.83, click the make selection transparent, color white. Hide this one again and open the next one.

Repeat the rip open filter changing only the curl amount to 15. Repeat the filter hiding and unhiding the layers as you go with the following settings for the curl amount:
On the next one change it to 25.
The next one is going to be 30.
Then 40, and the last one is 50.

Now make sure all the flower layers are closed and unhide only the flower on top which should be the normal flower that we left alone.

Click this layer to make it active and add your name again in the same font with the same edge enhance effect. Place your name over the center of the flower and make it small enough to fit the center. Give it a drop shadow.

Duplicate this layer and move it below the top flower layer. Now hide the top flower layer and Unhide the second flower layer.With your eraser tool on a size of 24 or smaller, erase any part of the name that is not on a petal. Once done, close both this name layer and flower layer.

Open the top flower layer and name layer. Now we are going to animate.

Go to edit, copy merged, Go to animation shop, Paste as new animation.

Back in psp, close off the top name layer and the top flower layer. Open the erased name layer and the second flower layer. Edit, copy merged, back to animation shop, edit paste after current frame.

Back in psp, close off the second flower layer and the erased name layer and open the third flower layer. Copy merged, back to animation shop, paste after current frame.

Back to psp, close the third flower layer and open the fourth, copy merged, back in animation shop, paste after current frame.

Repeat these steps for the fifth, sixth and seventh flower layers. Once you have that done, In psp, close off the last flower layer so now all your flower layers that are above the tube layer should be closed. Click one of the visible layers to make it active and go edit copy merged, and go back to animation shop and paste after current frame.

Now still in animation shop go to edit select all, then go to animation frame properties and change it to thirty, then go back to animation and this time choose animation properties and choose opaque and color is white. View your animation and save.

thats it, you are done.

©Angel Flowers Tutorials 2010

Fallen For You

Click the tag to see it full size.

This Tutorial was written by me, Angel Flower, from my own ideas. Any similarities to others is coincedence. All my tutorialsare registered with TWI.

For this tutorial you will need A tube of choice. I am using the work of David Desbois http://daviddeb.deviantart.com/. You must have permission to use his work.

Scrapkit- This kit is called My Fallen Valentine by Crimson Butterfly Scrapz. You must purchase this kit at http://www.digifoxsstudio.net/ or http://www.digitalchaos.net/ to use it.

Filters used-Xenofex2 constellation(optional) Eye Candy 4000 gradient glow(optional)

New Image- 600x600 transparent. Copy and paste the frame3 as a new layer. Resize it by going to image-resize-80 percent, all layers unchecked, lock aspect ratio checked. Then resize again by 85 percent.

If you are going to use a paper for your fill, paste it as a new layer. Resize by 70 percent. Move this below your framelayer. Make your frame layer active. Grab your selection tool and set to ellipse, feather 0, anti alias checked. Drawa selection around your frame without going outside the edge of the frame. This may take a few tries to get it quite right.Selections invert, on your paper layer hit delete. Now you should only have the paper inside the frame. I chose to use a color for my fill. Instead of pasting a paper, I drew my selection, added a new layer and flood filled it with my color. Then i moved my fill layer below my frame layer.

I gave my frame a very slight white drop shadow of 0,0,50,5.

Paste your tube as a new layer. If it needs to be resized use the same method we did above and start with about 85 percent. If its still too big, repeat this, if it is too small, undo and change the percentage. The other way to resize if you need just a little is to grab your pick tool, grab the box around the tube by a cornter and drag it slightly to the size you want. Dont worry if just a little of your tube hangs over, we will fix that. Make your fill layer active. Go to selections, select all, selections float,then defloat, selections invert and hit delete on your tube layer. Make sure this layer is above the paper but below the frame.

Open candle1 and paste as a new layer. Resize it about like mine and place on one side of your tag. See my tag for reference.Once happy with the placement, duplicate and mirror. You may need to postion this one slightly. Now you have one on each sideof your tag.

Copy and paste the rose3 as a new layer. Resize and position on the left side of the tag so it covers the bottom of the candle. See my tag for placement.

Copy and paste rose2 as a new layer. Resize just a little and go to image free rotate, 90 degrees right, both boxes unchecked. Positiontoward the bottom of the tag with the end of the stem further toward the other rose we placed. Move this layer below the other rose layer. Again see my tag for how this should look.

Copy and paste the envelope as a new layer. Resize it about like mine. Move below the rose layer. Position it so it sits on the right side of the tag. I slighly rotated mine using the pick tool. Then i went to effects, edge effects, enhance. See my tag for how this looks.

Copy and paste the feather2 as a new layer. Resize it to your liking or about like mine. Move this layer below the candle layers. Position on the left side of the tag so it sticks out above the candle some. See my tag for placement. Once happy with it, duplicate it and mirror. Put into position if necessary.

Give each feather the same drop shadow we used earlier. Now the next part is optional. I added a slight constellation to mine using xenofex2,1.98, 22, 9, 0, 80, 75, rotation 45, keep original, and click random seed once. Do this for each feather.

I then added a flourish1 to mine and moved it under all the layers. I positioned it to the right of the tag, resized it, then duplicated it and mirrored it.

I did not resize my tag but if you wish to resize yours now is the time to do so. Go to image resize, all layers and lock aspect ratio both checked. Change the percent to pixels and choose your size. When you change one, the other automaticly changes.

Now add your copyright info so it is clearly visible. I added a gradient glow of 3 to mine from eye candy.

Now add your name in a scripty type font. Postion where you like or how i have mine. If you wish to add a glow, convert to raster and go to eye candy 4000 gradient glow, under the basic tab 3,25,100, under the color tab the first tab should be white, I added a second white tab, and then i added a third taband changed the color on the third one to the dark red in the name, opacity 100. You may also give your name a black drop shadow if you wish.

Thats it, you are done.
©Ange Flowers Tutorials March 2010

Lillian and Melita

Click the tag to see it full size.

This Tutorial was written by me, Angel Flower, from my own ideas. Any similarities to others is coincedence. All my tutorialsare registered with TWI.

For this tutorial you will need

Two tubes of choice. I am using the work of Myka Jelina. In order to use the image in this tutorial you MUST purchase it from CILM.

Filters- Kang 4 bubblecross waves and bat wave

Eye candy 3.1-HSB noise

Dsb flux-linear transmission

New image-600x600 transparent.

Paste your main tube as a new layer and position in the center of your canvas. If it needs to be resized you can resize one of two ways. The first is to go to image-resize-make sure the first drop box says percent and not pixels, start with 85, all layers unchecked, lock aspect ratio checked, and for the resample box choose smart size.If it is still too big, repeat those steps. If it is too small then go to edit, undo, and repeat the resize using a larger percent. The other way to resize is to click the little arrow tool, also known as the pick tool, and you will see a box around your tube. Grab the box by a corner, this will keep it proportionate, and carefully drag it to the size you want. You will need to repostion your tube if you use this method. Any time I say to resize and i do not specify, you may choose to use either of these methods.

Click your preset shape tool and set it to ellipse with a width of 7. Make your foreground color black or a dark color from your tube, and your background color a lighter color from your tube.

Draw out a shape about the size of mine. Position it so that it looks as though your tube is sitting in the cirle or standing in front of it if you chose a standing tube.

Grab your magic wand tool-mode is add, match mode is rgb value, tolerance 20, feather 0, anti alias checked, and choose outside in the last drop box. Click in the center of your circle.Keep selected. Right click on the circle layer and choose convert to raster. Now go to effects, plugin-Kang 4-batwave - x frequency 180- y frequency 124- this works with that 46- this works with this-98- orientation mode 19- carving light 35- style light 27- color cycle 233. KEEP SELECTED.

We need to colorize this to match our tube. Go to adjust-Hue and saturation-you can either choose colorize or hue/saturation/lightness-if you choose colorize, simply move the first bar to the color you want, and the second one to make it more or less colorful. If you choose hue/saturation/lightness, check the colorize box, move the top slider bar that goes across(this is the hue)to about the color you want, then move the saturation and lightness bars till you get just the right shade. Keep selected.

Again go to your kang 4 filter, this time choose bubble crosswaves-x freq. 224- y freq. 206- x ampl. 154- y ampl. 154= bubble cross 129. Now go to selections-select none.

Give your tube a drop shadow by going to effects-3d effects- drop shadow, i used vertical -2, horizontal 0, opacity 75, blur 10, color black.

Click on your blank background layer. Grab your preset shape tool again but this time choose rectangle. Make your foreground color the same that you used for your circle but change the background color to a medium color to match your tube. Draw out a rectangle almost the width of the canvas and slightly shorter than your circle. See my tag for the size and placement. It should be almost centered under the circle.Convert to raster.

Now click on your circle layer. Paste your other tube as a new layer and resize it. Position on one side of the circle about how i have mine. Dont worry about any excess that hangs over the rectangle. We will fix that. Once happy with the position, go to image-duplicate, and then image mirror. You should now have one on each side. Double click on one of them and change the blend mode to hard light. Do the same for the other one.

Now grab your magic wand tool with the same settings as before. Click on the rectangle layer to make it active. Now click inside the rectangle with the wand. Go to selections invert. Click on one of the tube layers we are using and hit delete on your keyboard. Click on the other one and do the same thing. Now all the excess tube is gone. Go to selections invert. Keep selected.

Make your rectangle layer active by clicking it. Go to effects-plugins-eye candy 3.1-HSB noise- hue 0, saturation 18, brightness 36, opacity 0, lump width and lump height 12, random seed 1. Keep selected. Go back to plugins-kang 4-bubble cross waves with same settings as before. Selections-select none.

Give your circle layer a drop shadow of 0,0,100,10,black. You may give your rectangle layer the same drop shadow if you wish.

Hide your top tube layer, this should be your main tube, by clicking the eye next to it. Now right click on any other layer and go merge visible. Now you should have two layers. Unhide the tube layer now. Click on the merged layer we made. Duplicate this layer. On the bottom copy go effects-plugins-dsb flux linear transmission-size 5, offset 5, blend 0, vertical clicked. Go effects, edge effects, enhance.

Almost done. Before we add anything else, this is the time if you wish to resize your tag to do so. To do this you must use the image resize method. This time make sure the box says pixels instead of percent, make sure all layers is checked and change the pixel size to the size you want, when change one the other will change too so the tag stays proportionate.

Now we can add our copyright. Click on your top layer and add a new raster layer. To do this just go to layers, add new raster layer. Add your copyright. Make sure it is clearly visible. I usually add a gradient glow either white or a color to match but that makes it more visible with a size of 3, or a white drop shadow.

Now we will add our name. Click on your text tool which is the A. Choose your font. Choose the colors for the foreground and background that match your tube. You may use whatever font and size you like. To do it like mine i used a font called neuropol at a size of 72. Place how you like or how i have mine. Convert to raster. Go effects-edge effects-enhance. Now grab your magic wand, same settings, and click inside each letter. Go to effects-eye candy 3.1- and use the hsb noise with the same settingswe used earlier. Keep selected. Go to plugins-kang 4-bubble cross waves with these settings x and y freq 255, x and y amplitude 120, bubble cross 0. Selections- select none.

You can give your name a drop shadow if you wish.

Thats it, save and you are done.
©angel flower January 2010

Twirled fire

Click the tag to see it full size.

This Tutorial was written by me, Angel Flower, from my own ideas. Any similarities to others is coincedence. All my tutorialsare registered with TWI.

For this tutorial you will need A tube of choice. I am using the work of Amy Brown. In order to use the image in this tutorial you MUST purchase it from CILM.

A circular type mask- I am using a mask called sg_stencilled-circle1 by Essex Girl, you can find her masks here http://www.essexgirl.uk.com/sg_masks_index.htm. I do not know which page this mask is on, sorry.

Filters-DSB Flux linear transmission

New image-600x600-transparent.

Paste your tube as a new layer. If needed resize it by clicking the little arrow tool and then drag the box around the tube by the corner to the size you want. Or if you would rather, go to image-resize-lock aspect ratiochecked, all layers unchecked, choose percentage, about 85 percent. If it makes it too small or is still too big, undo and try again with a different percentage. Center the tube in the canvas.

Duplicate your tube layer. On the bottom tube layer, go to effects-distortion effects-twirl 720. Still on this layer, go to adjust-add noise-guassian, monochrome-40.

Duplicate your tube layer again. Again, on the bottom tube layer, go to effects-plugins-dsb flux-linear transmission- size 4, offset 11, blend 0, horizontal. Move this layer below your twirled layer. Go to effects-3d effects-drop shadow 0, 0, 100, 5 white.

Click your bottom blank layer to make it active. Grab your paint bucket tool and Choose a light to medium color from your tube for a fill color. Flood fill this layer with the color you chose. Go to layers-load/save mask-load mask from disk- in the drop box find the mask you are using and click it, source luminance, fit to canvas, hide all, and invert checked. Load. Right click on the mask layer and merge group. Now go to effects-edge effects-enhance.

Hide all your layers except the masked layer by clicking the eyes next to them. grab your magic wand-mode is add, match mode rgb, tolerance 10, feather 0, anti alias checked. Click in the center of the masked layer. The center circle part of the mask should have the dancing ants around it. If it doesnt, you may have to use the selection tool instead and set it to ellipse and select it that way. Once selected, go to adjust-add noise-random-monochrome15. Select none.

Unhide your other layers.

Make your tube layer active. Go to effects-3d effects- drop shadow, 0, 0, 80, 10, black.

Now is the time if you wish to resize your entire tag to do so. I did not resize mine. If you wish to do so, go to image resize- all layers checked, lock aspect ratio checked, pixels instead of percent, and choose the size you want.

Now add your copyright so it is clearly legible. I added a gradient glow to mine with a size of 3.

You can use a drop shadow in a light color also if needed.

Add your name. Right click and convert to raster. Go to effects- edge effects-enhande. Now go to adjust- add noise-guassian-monochrome-20. Repeat the noise this time with add noise-random-monochrome-15.

Give your name a drop shadow of choice.

Save and you are done!

©ANGEL FLOWER DECEMBER 2009

Twilight Things

click the tag to see it full size

This Tutorial was written by me, Angel Flower, from my own ideas. Any similarities to others is coincedence. All my tutorialsare registered with TWI.

For this tutorial you will need

A tube of choice. I am using a ftu image by Zindy Nielson, visit her site here http://zindy-zone.dk/

Scrapkit. I am using a PTU Collab kit called It's A Twilight Thing by some of the awesome desingers at Digi Fox's Studio, http://digifoxsstudio.net/store/.

A note: Some of these items are full size and will need to be resized by going to image-resize, then make sure you have all layers unchecked, and lock aspect ratio checked. You willwant to use the percent instead of pixels to resize these items. I used a percent of 40 on mine but if you do this and it makes it too small, simply use your edit and undo function, thenresize it with a slightly larger percentage. If it is still too big after the first resize, then resize again using about 75 percent. It is trial and error to get it just right so just undoor repeat the resize, and adjust as needed till you get it right if it comes out wrong. If the item is a tagger size item, then just resize by about 75 percent.

ok lets start.

New image-600x600-trasnsparent.

Choose a frame and paste as a new layer. If needed resize and place in the center of the canvas.

Grab your magic wand-tolerance 20, feather 0, mode is add, match mode is rgb, anti-alias checked, and outside, click in the center of the frame. Go to selections-modify-expand by four. Paste another paper of choice as a new layer, keep selected and resize. Once happy with the size, go to selections invert, hit delete, select none. Move this paper layer below your frame layer.

Open the tt_IATT_sparkle and paste as a new layer. Make sure this layer is just above the background paper. Move it to the top left corner. See my tag for reference. Duplicate this layer and go image-mirror and then image-flip.

On the top sparkle layer right click and choose layers merge down. You should now have both sparkles on one layer. Duplicate it and go image-mirror. Again see my tag for reference.

Open the AD_Doodles and paste as a new layer. Put this layer just above the sparkles. Resize by 80 percent and slide it down so there is nothing sticking out of the top of the frame. It shouldonly be showing under the bottom of the frame. Once happy with it, duplicate and flip.

Merge these two together like we did with the sparkles. Duplicate again. This time go image-free rotate-left, 90, all layers unchecked and rotate single layer around canvas checked. OK, one more time, duplicate this layer and go image flip. See my tag for reference for how they should look.

Open the rose2_FD_DFS and paste as a new layer. Resize it and go image-free rotate, same settigs as before. Place the rose at the bottom of the frame as i have mine. Once happy with it, Duplicate it, and go image mirror, then image flip, and again position as i have mine. You may need to use the eraser brush with a size of 15,hardness 80, step 1, density 100, thickness 100rotation 0, opacity 100. On the top rose, Erase the end of the rose the rose stem that is on top of the other rose just enough so it looks as though it goes underneath it. This may be tricky.

Merge the two roses together and give them a drop shadow by going to effects-3d effects-drop shadow. Vertical -2, horizontal 0, opacity 100, blur 10, color black.

Open the open one of the candles that looks similar to mine and paste as a new layer. Resize it and move this layer below the roses. See my tag for placement. Once happy with it, duplicate and go image mirror and if needed postion as i have mine. Now you need to paste the candle again as a new layer and resize, but make this one slightly larger than the others.Position above the roses and in the center of the other two candles.

Give each candle a drop shadow of V -2, h 0, opacity 70, blur 5, color black.

Now we will add the tube. Click on the paper layer we made for the frame. Paste your tube as a new layer and resize by about 80 percent. If it is still too big repeat the resize. If it is the size you want but there is some sticking out from under the frame thats ok, we will fix that. Once you have it positioned how you like, grab your magic wand and click on your frame layer. With the magic wand, click in the center of the frame, go selections modify-expand by 5, make the tube layer active again and go selections inevert, hit delete. Select none. My tube was a black and white tube, or grey tones, so I double clicked on the tube layer and changed the blend mode to luminance.

The next part is optional, i added the wordart heart lion and lamb and resized it and postioned in the bottom center of the tag. I gave it the same drop shadow as the candles.

Now is the time if you wish to resize your tag to do so. Go to Image-Resize-use pixels this time, make sure all layers and lock aspect ratio are both checked, and change the pixels to the size you want, when you change one the size, the other should automaticly change too. This keeps the proportions of the tag.

Add your copyright so it is clearly visible. I add a glow of about 3 to mine using eye candy.

Now add your name. Position how you like and give it a drop shadow of choice. Now save and you are done.

©Angel Flower OCTOBER 2009